EZ Fire Metallic Bronze Enamel Powder

Introducing the new Fuse Master Metallic High Fire Enamel.
Add brilliance to your work with this exciting new line of metallic enamels that are easy to fire and don’t require venting. Unlike mica, these metallic enamels do not require a top layer of clear and they don’t wash off after firing, so a much thicker layer remains on the glass. The mixing ratio is slightly different – around 50/50 powder to medium will make a great screen printing or painting paste. They look best used on top of the glass (not capped as this dulls the shine) and full fused. Use them for screen-printing or with a brush to add sheen and highlight to your work. They can be used for full fuse firings, glass blowing and lamp working without burning out. EZ Fire Metallic Enamels are a very fine grind so they can be brushed, silkscreen printed, stippled or air brushed onto a base glass. One ounce of enamel will cover approximately 3.7 square feet of glass so they are an inexpensive alternative to sheet glass. Try them today.

Mix with ScreenLine™ Water-based Medium for painting and screen printing.

Supplied in ½ ounce and 1 ounce bags.